Duratec 2.0L

Billet Balance Shaft Delete Plug

Billet aluminum Duratec & Ecoboost 4-cylinder balance shaft housing delete plug.  This plug is used to seal off the oil feed for the bal..

Esslinger Engineering

Duratec/ MZR Cam & Crank Timing Tool Set

Duratec & MZR Cam and Crank Timing Tool SetThe GOLD standard in cam and crank timing tools!These cam and crank alignment tool set fits 4-cylinder..

Esslinger Engineering

Duratec/ MZR Cam Timing Alignment Tool

Duratec & MZR Cam Timing Alignment ToolThe GOLD standard in cam timing tools!This cam alignment tool fits 4-cylinder Duratec (2.0L, 2.3L, and 2.5..

Esslinger Engineering

Rear Sump Rear Wheel Drive Swap Oilpan

Rear Sump Duratec/ Ecoboost Rear Wheel Drive Swap Oilpan & Pick-up TubeOur fabricated oilpans feature extra thick flanges, super slim shallow end ..

2.0L Duratec/ Ti-VCT Block

We start with a brand new Ti-VCT block so that the customer has the choice of which style cylinderhead (VCT or non-VCT) to install on it, as well..

2.5L Duratec Esslinger-spec Cometic head gaskets

Working with Cometic we have been able to come up with a line of premium MLS (Multi Layer Steel) head gasketsthat meet the stringent demands of a perf..

Ford

2012+ Focus 2.0L Ti-VCT Cam Bolt

2.0L GDI Ti-VCT Cam BoltThis bolt is a one time use torque-to-yield fastener.  A new bolt is required each time you remove the cam gear from the ..

3/8"NPT Coolant Temp Sensor w/ Delphi connector

Thread: 3/8"NPT MaleTemp Range: -40 to 275deg. F (-40 to 135degC)Mating Connector: Delphi P2S 2-way*** For aftermarket ECU's, guages, and dataloggers ..

ARP Duratec / Ecoboost Mainstud Kit

Includes:10pcs 200,000 psi 10mm main studs10pcs 12pt 10mm nuts10pcs Flat Ground 10mm washersARP Ultra-Torque Assembly Lube..

Esslinger Engineering

Billet Oil Inlet Adapter

Includes:1pc. Black Anodized Oil Inlet Adapter Plate1pc. O-ring AN Inlet Fitting (-10AN or -12AN)100% Made in America*** This oil inlet adapter is for..

Brisk GR M14 x 18mm Sparkplug

14mm x 18mm reach tapered seat sparkplugApplication:1975-2001 Ford 2.0, 2.3, & 2.5L engines2003-2011 Ford 2.0L & 2.3L Duratec non-VCTFeatures:..

Brisk RR M14x25mm Sparkplug

14mm x 25mm reach tapered seat sparkplugApplication:Fits all Ford Duratec with VCT, Ford Ecoboost, Mazda DISI, and Mazda MZR engines with VCTFeatures:..

Cometic MLX Headgasket

Working with Cometic we have been able to come up with a line of premium MLX head gasketsthat meet the stringent demands of a performance Duratec engi..

Duratec / Ecoboost Cam Bolts

Duratec Cam BoltsWe offer 2 types of cam bolt for the Duratec engines.  On cams that have dowel pinned gears, we prefer the ARP cam bolts as they..

Esslinger Engineering

Duratec Timing Belt Conversion Kits

*****If you order the kit online, you will not be refunded for the shipping********** Call or e-mail for actual pricing with the options you require *..

Esslinger Engineering

Duratec/ MZR Crank TDC Tool

Duratec & MZR Crank Timing TDC ToolThe GOLD standard in crank TDC tools!This crank TDC tool fits 4-cylinder Duratec* (2.0L, 2.3L, and 2.5L), 4-cy..

Esslinger Engineering

Esslinger Billet Duratec Crank

These cranks are not only stronger than the cast 100mm. and forged 94mm cranks, they are also way lighter!We've been manufacturing crankshafts for ove..

Ford

Ford 4-cylinder pilot bearing

OEM replacement needle bearing type pilot bearing. ..

Esslinger Engineering

Forged 94mm 2.3L Stroker Crank w/ 47mm Rod Journals

This is the crank we use in our 2.3L stroker shortblocks in a 2L block!We start with a brand new forged crankshaft, and machine the snout for a 5mm wi..

King Ecoboost / Duratec Race Series Main Bearings

These race series bearings feature tri-metal construction for improved particle embedability compared to the OEM Aluminum based bearings without sacri..

Esslinger Engineering

MX5 (NC) Roadrace Oilpan

Fits 2006-2015 Mazda MX5 cars with any Duratec 4-cylinder engine.  These oilpans can be used in street, roadrace, drag, drift, and circletrack ra..

Esslinger Engineering

Pro Series BV (Big-valve) 2.5L Duratec Head

Since 2014 our company has been in a constant development program working on Duratec cylinder heads and engines.  These Pro-series big-valve 2.5L..

Esslinger Engineering

Pro-Series Duratec Dual Valvespring kit

Our Pro-Series Duratec Dual Valvespring Kit is for engines that rev-over 8,000rpm with aggressive cams or high boost!Kit Includes:16pcs Dual REM polis..

Side Mount Dry-Sump Pumps

We've worked with world class drysump supplier Barnes Systems, Inc. to come up with the most advanced drysump pump available for the Duratec/ MZR/ DIS..

Esslinger Engineering

SPORT CAMS (STG 1 VCT Cam Set)

Stage 1 cams are for unopened or upgraded rotating assembly Mazda and Ford Duratec (6 tooth cam trigger) 2L & 2.5L n/a engines. Our stag..

Esslinger Engineering

SPORT CAMS (STG 2 VCT Cam Set)

Stage 2 cams are for unopened or upgraded rotating assembly Mazda and Ford Duratec (6 tooth cam trigger) 2L & 2.5L n/a engines.*** Stage..

Esslinger Engineering

SPORT CAMS (STG 3 VCT Cam Set)

Stage 3 cams are similar to our stage 2, but require aftermarket pistons with deeper valve reliefs.*** Stage 3 cams require our valve spring kit found..

Esslinger Engineering

SPORT CAMS (STG 4 VCT Cam Set)

Stage 4 cams are for high compression street Mazda and Ford Duratec (6 tooth cam trigger) 2L & 2.5L n/a engines that have aftermark..

Esslinger Engineering

SPORT CAMS (STG 5 VCT Cam Set)

Stage 5 cams are for racecars with 12:1 compression or higher Mazda and Ford Duratec (6 tooth cam trigger) 2L & 2.5L n/a engines th..

Duratec 2.0L Race Series Rod Bearings

These bearings feature tri-metal construction for improved particle embeddability and load carrying capacity compared to the OEM Aluminum based bearin..

Esslinger Engineering

SPORT CAMS Ti-retainer valvespring kit

This spring kit works with all of our SPORT CAMS line of Duratec, Ecoboost, and DISI cams (VCT & non-VCT).By utilizing "clean wire" technology and..

Esslinger Engineering

"Chip Flip" Exhaust Manifold Adapter Kit

This 1" thick solid steel CNC machined adapter allows for mounting turbo manifolds upside down.  Mounting a top-mount manifold upside down with t..

MoTeC

MoTeC M130 ECU

MoTeC's unique M1 technology redefines the meaning of customisation, delivering total control without compromise, while highly advanced security strat..

Esslinger Engineering

PRO-SERIES Duratec Turbo Cam Set

Pro-Series camshafts are compatible with the 2.0L/2.3L & 2.5L Duratec NON-VCT daily driver type 2003-2007 Duratec engines with single tooth cam tr..

Esslinger Engineering

PRO-SERIES STG 4 Duratec Cam Set

Pro-Series camshafts are compatible with the 2.0L/2.3L & 2.5L Duratec NON-VCT daily driver type 2003-2007 Duratec engines with single tooth cam tr..

Esslinger Engineering

PRO-SERIES STG 5 Duratec Cam Set

Pro-Series camshafts are compatible with the 2.0L/2.3L & 2.5L Duratec NON-VCT daily driver type 2003-2007 Duratec engines with single tooth cam tr..

Esslinger Engineering

PRO-SERIES STG 6 Duratec Cam Set

Pro-Series camshafts are compatible with the 2.0L/2.3L & 2.5L Duratec NON-VCT daily driver type 2003-2007 Duratec engines with single tooth cam tr..

Esslinger Engineering

Pro-Series Turbo 2.5L Duratec Head

Since 2014 our company has been in a constant development program working on Duratec cylinder heads and engines.  These Pro-series Turbo 2.5L hea..

Racetec Pistons

Sport-Series Forged 2.0L Pistons (87.578mm Bore)

Sport-Series pistons are Made in the USA by our partner Racetec Pistons. These pistons are machined from 2618 Alloy forgings, not the more fragile 403..

Racetec Pistons

Sport-Series Forged 2.0L Pistons (87.5mm Bore)

Our Sport-Series pistons are Made in the USA by our partner Racetec Pistons. These pistons are machined from 2618 Alloy forgings, not the more fragile..

Racetec Pistons

Sport-Series Forged 2.0L Pistons (88mm Bore)

Sport-Series pistons are Made in the USA by our partner Racetec Pistons. These pistons are machined from 2618 Alloy forgings, not the more fragile 403..

2.0L Duratec "Stroker" Pistons (87.578mm Bore)

This piston set is a replacement for our 2.3L Stroker kits for the 2.0L Duratec blocks!Valve Reliefs:Valve Reliefs fit up-to 37.5mm intake valves and ..

2.0L Duratec "Stroker" Pistons (87.5mm Bore)

This piston set is a replacement for our 2.3L Stroker kits for the 2.0L Duratec blocks!Valve Reliefs:Valve Reliefs fit up-to 37.5mm intake valves and ..

2.0L Duratec "Stroker" Pistons (88mm Bore)

This piston set is a replacement for our 2.3L Stroker kits for the 2.0L Duratec blocks!Valve Reliefs:Valve Reliefs fit up-to 37.5mm intake valves and ..

Esslinger Engineering

2012+ 2.0L Focus N/A Ti-VCT Camshafts (STG2)

2.0L Ti-VCT Performance CamshaftsStage 2 cams are designed to work with the OEM Ford valve springs, but upgraded our sport cam valve springs would be ..

Esslinger Engineering

2012+ 2.0L Focus N/A Ti-VCT Camshafts (STG3)

2.0L Ti-VCT Performance CamshaftsThese cams for  maintain the use of your variable cam timing (VCT). The Stage 3 cams require an upgraded valve s..

Esslinger Engineering

2264cc 2.0L Stroker Shortblock

Are you looking for 20 to 30 hp more from your 2.0L Duratec or 2.0L Ti-VCT engine?2.3L (2264cc & 2287cc)  Stroker Shortblocks include the fol..

Esslinger Engineering

2L to 2.3L Duratec Stroker Kit

2L to 2.3L Duratec Stroker Kit87mm bore size = 2261cc87.55mm bore size = 2264cc88mm bore size = 2289ccThis kit includes the following:Forged 94mm Stro..

ARP Duratec / Ecoboost 8740 Headstud Kit

We recommend this head stud kit for normally aspirated engines with up to 13:1 compression!  Above 13:1 compression and with boost above 15psi we..

Esslinger Engineering

Ecoboost / Duratec to SBF Bellhousing Adapter

This bellhousing adapter fits both Ecoboost AND Duratec 2L/2.3L/2.5L engines.  It's designed to adapt the Small Block Ford bellhousing onto the 4..

Esslinger Engineering

Keyed MX5 Crank Damper

KEYED MX5 Crank DamperThis crank damper is for use on Duratec/ MZR engines being used in 2006-2015 Mazda MX5 cars, or applications that use the Mazda ..

Duratec Flat Face Intake Valve

For High Compression engines!****Our flat face valves reduce the chamber volume about 1cc!****35mm (Stock), or 36mm (+1mm) Head Diameter5.5mm. (Stock)..

Duratec Dished Face Intake Valve

For High-RPM or Low-Compression engines****Our dished face valves are similar volume to OEM valves****35mm(Stock), 36mm(1mm), or 37.5mm( 2.5mm) Head D..

Esslinger Engineering

Black Aluminum 1.5" Water Inlet Housing

Duratec/ Ecoboost 1.5" Hose Water Inlet Housing100% Made in AmericaNo thermostat to improve water flow to the waterpump in racing applications, or oth..

Duratec Flat Face Exhaust Valve

For Hi-Compression engines****Flat faced valves reduce chamber volume approx. 1cc.!****30mm(Stock), or 31mm( 1mm Oversize) Head Diameter5.5mm. (Stock)..

Esslinger Engineering

Ecoboost/ Duratec to SBF Crank Adapter

This hub-centric billet crank adapter bolts to your Ecoboost or Duratec crankshaft and allows you to use any neutral balance small block Ford flywheel..

Duratec Dished Face Exhaust Valve

For High-RPM or Low-Compression engines****Our dished face valves are similar volume to OEM valves****30mm (Stock), 31mm (+1mm), or 32mm (+2mm) Head D..

Duratec Valve Keepers

5.5mm Duratec Valve Keepers that work with OEM retainers and both of our upgraded valvespring kits!1 pair of keepers16 pair of keepers are needed for..

Ecoboost/ Duratec to SBF Bellhousing Adapter Starter

This Hi-Torque starter is designed to reduce or eliminate the grinding necessary to install a conventional Ford SBF starter when using our Ecoboost/ D..

Esslinger Engineering

12:1 2264cc 2.0/2.3L Stroker Shortblock

Are you looking for 20 to 30 hp more from your 2.0L Duratec or 2.0L Ti-VCT engine?2.3L (2264cc)  Stroker Shortblock built in a short deck 2.0L bl..

Esslinger Engineering

Duratec/ Ecoboost Valvestem Seal

These valvestem seals work for both intake and exhaust valves on Duratec, Eoboost, and MZR enginesSold individually.  Order 16pcs for a complete ..

Esslinger Engineering

Keyed Duratec 19 Tooth Crank Gear

OEM Ford 2.5L crank gear that we have cut for an internal 5mm keyway.  This gear is for use with engines that have 38 tooth cam gears and matchin..

-12AN Outlet / -16AN Inlet drysump tank

Over the past couple years we've seen more engine failures from improperly made oil tanks than ever before!  We sat down with Peterson and togeth..

Esslinger Engineering

Remote Tuning Individual E-tunes

We offer remote tuning on a select case by case basis.  This service is only offered to customers that have an ECU that we support, and have the ..

Ford

31mm Solid Cam Bucket

These 31mm solid cam followers will work with our Ecboost and Duratec camshaft sets, and are available in the following range of thickness': 3.000 - 3..

Bosch LSU 4.2 Lambda Sensor w/ connector kit

Bosh LSU 4.2 Wideband Lambda sensorThis sensor can be used on engines controlled by an AEM Infnity ECU without needing an external controller.  I..