Ford 2-valve 4-cyl Engines & Parts
Select from the categories below
availabe: 7 in stock
1.890" x 4.800" x 11/32" x .400" tip Roller Intake Valve
Stainless Steel Ford SOHC valves for use with 1.000" base circle roller cams & profile tips11/32" valvestem diameter4.800" length.400" tip to groo..
$23.99
availabe: 7 in stock
1.590" x 4.800" x 11/32" x .400" tip Roller Exhaust Valve
Stainless Steel Ford SOHC valves for use with 1.000" base circle solid roller cams & profile tips11/32" valve stem diameter4.800" length.400" tip ..
$23.99
availabe: 8 in stock
2.020" ARCA intake valve w/.475" tip
Oversize intake valve stainless 2.020" .475" tip - single square groove style ***Only for use with our ARCA and ST midget heads***..
$44.00
availabe: 20 in stock
Ford SOHC 1pc. Rubber Oil Pan Gasket
1pc. rubber oil pan gasket fits all OBD1 Ford SOHC blocks** Early blocks that have M8x1.25 bolt holes next to the rear main cap and in the front crank..
$64.47
availabe: 8 in stock
1.600" ARCA exhaust valve
1.600" dia. x 11/32" stem x 4.900" length x .475" tip to groove, with single square style keeper groove***Only for use with our ARCA and 4-tower..
$44.00
availabe: 20 in stock
ARP Ford SOHC Mainstud Kit
ARP Main stud kit for 1974-1997 Ford 2300 SOHC "Lima" engines, and 1998-2001 Ford 2.5L SOHC "Lima" enginesBenefits:More consistent torque valuesHigher..
$177.53
availabe: 2 in stock
Ford 2300 SOHC Timing Pointer for OEM crank pulley
This black anodized timing pointer bolts on to the engine to replace the outer plastic timingbelt cover and provides nice clear easy to read timing ma..
$137.49
availabe: 20 in stock
Ford SOHC M8 to M6 Oilpan corner studs
These studs are for use when using a 1pc oilpan gasket on an earlier 2pc block or front main seal holder with M8x1.25 threads on each side of the hump..
$28.99
availabe: 20 in stock
Old style Esslinger Ford 2300 SOHC Timing Pointer
This timing pointer is for Esslinger current 2 groove and older 1 groove pulleys that have the timing marks on the flat face...
$8.80
availabe: 3 in stock
3.810" Bore 1.2,1.5, 3mm Nitrided File-fit Rings
File-fit Rings:1.2mm Nitrided Steel Top Rings1.5mm cast Napier 2nd Rings3mm 3pc. stainless Oil RingsBore Size:3.810" (+.030" over)..
$119.52
availabe: 18 in stock
Ford SOHC Roller Rocker Arm
Re-manufactured Ford 2300 Roller Rocker made out of investment cast steel.Ratio: 1.81"**** Sold individually, 8 required per engine****..
$42.75
availabe: 1 in stock
JE Ford 2300 SOHC 2.8L crank 5.5" Rod Forged pistons
JE Ford SOHC 2.8L flat-top 5.5" rod pistonsCompression Height: .960"Wristpin diameter: .927"Use with 1.2, 1.5, 3mm rings (available separately here)Va..
$699.99
availabe: 1 in stock
-12AN Outlet / -16AN Inlet drysump tank
Over the past couple years we've seen more engine failures from improperly made oil tanks than ever before! We sat down with Peterson and togeth..
$699.99
availabe: 76 in stock
14mm lash adjuster
Extra long M14x1.25 adjuster studAlso called "solid lifter" by some people.(sold individually. 8 needed per engine)..
$11.55
availabe: 96 in stock
14mmx1.25 SOLID LIFTER JAM NUTS
NUT-M14x1.25.B(Sold in sets of 8pcs.)These are the nuts we use in OEM Ford 2L, and solid lifter conversions in OEM Ford 2300 & Esslinger Aluminum ..
$39.60
availabe: 20 in stock
OVERSIZE/ REPAIR 14mm Solid lash adjuster sleeve
SLEEVE-866.14mmID.PRESSDo you have worn or loose lifter sleeves in your head! No more need for temporary fixes like set screws or staking. ..
$14.99
availabe: 1 in stock
-16AN Inlet/outlet drysump tank
RSI/XT/TST/ST/EST oil tankOver the past couple years we've seen more engine failures from improperly made oil tanks than ever before! We sat dow..
$699.99
availabe: 1 in stock
Ford 2.3L Turbo Ring Set
4-cylinder file-fit ring setAvailable bore sizes of 96mm (3.780"), +.5mm (+.020" over), and +.75mm (+.030" over)2mm. (5/64") Moly faced Ductile ..
$127.35
availabe: 1 in stock
JE/ Esslinger Ford 2.3L SOHC Turbo pistons
Description:Esslinger spec'd JE Pistons - forged from 2618 AlloyPistons are proven to handle over 500 whp!Bore sizes available: +.001", +.020", and +...
$659.99
availabe: 1 in stock
Remote Tuning Individual E-tunes
We offer remote tuning on a select case by case basis. This service is only offered to customers that have an ECU that we support, and have the ..
$27.49
availabe: 5 in stock
2.3 Dual Valve Springs **NOT FOR SOLID ROLLER CAMS**
Description:1.400"O.D., 1.055"/.785" I.D.Spring pressures as checked with Esslinger E2283 or E2282 retainer: RECOMENDED INSTALL HEIGHT 1.625"120# @ 1...
$90.20
availabe: 20 in stock
Retainers for 11/32" valves & Esslinger Ford SOHC non-roller dual valvesprings
These steel retainers work with 11/32" valves and our non-roller dual valvesprings.7-degree keerper retainer specs:O.D.: 1.375"Outer spring loca..
$48.40
availabe: 3 in stock
Dual Valve Springs for Solid Roller Cams
Set of 8pcs1.375"O.D Dual SpringsSpring pressures as checked with Esslinger pn# :RETAINER-975.710.10DEG.STEELRECOMMENDED INSTALL HEIGHT: 1.725"-..
$132.34
availabe: 8 in stock
Liteweight 10 degree Tool Steel Retainer - for Solid Roller only!
These ULTRA-LITE Tool-steel retainers are for roller cam applications using our dual spring pn# SPRING-1375.175/425.DUALThese require 10 degree k..
$245.08
availabe: 1 in stock
Bosch LSU 4.2 Lambda Sensor w/ connector kit
Bosh LSU 4.2 Wideband Lambda sensorThis sensor can be used on engines controlled by an AEM Infnity ECU without needing an external controller. I..
$182.70
availabe: 13 in stock
Cam tower strap kit
Description:Strengthens the head by welding metal straps to the top of the cam towers. If these straps are not welded in, the extra stresses and rpm c..
$56.00
availabe: 13 in stock
Ford SOHC Hydraulic Lash Adjusters
If you are replacing it's always good practice to replace the lash adjusters, and rockers. On reduced base circle cams lash adjusters with a wide oil ..
$77.52
availabe: 20 in stock
11/32" 7-degree Keepers
These 7-degree keepers are designed for aftermarket square groove valves like our oversize valves.These keepers fit 11/32" stem valves. Sta..
$35.11
availabe: 20 in stock
11/32" 10-Degree Keepers
These 10-degree keepers are designed for aftermarket square groove valves like our oversize and ARCA valves.These keepers fit 11/32" stem valves. ..
$35.11
availabe: 20 in stock
11/32" Multi-Groove Keepers
These multi-groove keepers are for OEM style 11/32" valves.11/32" Multi-groove Keepers***8 pair per set***..
$35.11