Our Pro-Series billet ITB manifolds feature tapered runners along with other proprietary attributes designed to improve drivability and performance on..
Our Pro-Series Duratec Dual Valvespring Kit is for engines that rev-over 8,000rpm with aggressive cams or high boost!Includes:16pcs Dual REM polished ..
If you are looking for the most powerful Pro R exhaust on the market, look no further!Our complete exhaust system is designed as a package, not just a..
This tool allows you to quickly and easily remove rocker arms on our SOHC engines***No additional tools are needed to remove rockers with the head ins..
We've worked with world class drysump supplier Barnes Systems, Inc. to come up with the most advanced drysump pump available for the Duratec/ MZR/ DIS..
ROD-xxxx.xxxx.827.H2.3L Rod Dimensions:6.094" long.827" (21mm) wristpin size1.9680" Journal Size2.0880" Big End Housing Dia..860" Big End Width3/8" AR..
GEAR-INT.1130.38T.SQUAREDescription: Hard anodized aluminum intermediate shaft pulley with square teeth. Save 2lbs.When is the product necessary:This ..
These bearings feature tri-metal construction for improved particle embeddability and load carrying capacity compared to the OEM Aluminum based bearin..
These bearings feature tri-metal construction for improved particle embedability and load carrying capacity compared to the OEM Aluminum based bearing..
**Stage 3 "Outlaw 350 carb in pictures~**For years we have supplied reworked Holley carbs with our engines that are required by rules to have a 2 barr..
**Stage 2 "Guage Legal" carb in pictures~**For years we have supplied reworked Holley carbs with our engines that are required by rules to have a 2 ba..
JE Ford 2300 SOHC flat-top 5.7" rod pistonsCompression Height: .960"Wristpin diameter: .927"Use with 1.2, 1.5, 3mm rings (available separately here)Va..
These bearings feature tri-metal construction for improved particle embedability compared to the OEM Aluminum based bearings.***Available only in Stan..
MoTeC's unique M1 technology redefines the meaning of customisation, delivering total control without compromise, while highly advanced security strat..
Since 2015 our company has been on the forefront of Ecoboost engine development program. These Pro-Series heads feature an increase in airflow of over..
We offer 5 stages of SPORT CAMS performance VCT camshafts for 2.0L/2.5L Mazda and 2.5L Ford Duratec engines (6 tooth cam trigger). These cams cover a..
ARP cam gear bolts fit all Coyote engines (2011 to current).M8 bolts (3 per cam gear) that hold the gear to the cam.Torque to 33ft.lbs. using ARP lube..
These pistons are replacements for our 2.3L Stroker kits for the 2.0L Duratec blocks!Bore Sizes available: 87.5mm, 87.578mm (our recommendation!), and..
Description:Strengthens the head by welding metal straps to the top of the cam towers. If these straps are not welded in, the extra stresses and rpm c..
Description: Comfortable 50/50 (Cotton/ Polyester) blend T-shirts with the Esslinger company logo centered on the sholders on back, and Esslinger "Hel..
KEYED MX5 Crank DamperThis crank damper is for use on Duratec/ MZR engines being used in 2006-2015 Mazda MX5 cars, or applications that use the Mazda ..
For High Compression engines!****Our flat face valves reduce the chamber volume about 1cc!****35mm (Stock), or 36mm (+1mm) Head Diameter5.5mm. (Stock)..
For High-RPM or Low-Compression engines****Our dished face valves are similar volume to OEM valves****35mm(Stock), 36mm(1mm), or 37.5mm( 2.5mm) Head D..
1pc. rubber oil pan gasket fits all OBD1 Ford SOHC blocks** Early blocks that have M8x1.25 bolt holes next to the rear main cap and in the front crank..
ARP Main stud kit for 1974-1997 Ford 2300 SOHC "Lima" engines, and 1998-2001 Ford 2.5L SOHC "Lima" enginesBenefits:More consistent torque valuesHigher..
Duratec/ Ecoboost 1.5" Hose Water Inlet Housing100% Made in AmericaNo thermostat to improve water flow to the waterpump in racing applications, or oth..
This hub-centric billet crank adapter bolts to your Ecoboost or Duratec crankshaft and allows you to use any neutral balance small block Ford flywheel..
This black anodized timing pointer bolts on to the engine to replace the outer plastic timingbelt cover and provides nice clear easy to read timing ma..
These studs are for use when using a 1pc oilpan gasket on an earlier 2pc block or front main seal holder with M8x1.25 threads on each side of the hump..
For High-RPM or Low-Compression engines****Our dished face valves are similar volume to OEM valves****30mm (Stock), 31mm (+1mm), or 32mm (+2mm) Head D..
5.5mm Duratec Valve Keepers that work with OEM retainers and both of our upgraded valvespring kits!1 pair of keepers16 pair of keepers are needed for..
This Hi-Torque starter is designed to reduce or eliminate the grinding necessary to install a conventional Ford SBF starter when using our Ecoboost/ D..
We offer remote tuning for Duratec/ MZR powered racecars and street vehicles that are not C.A.R.B. (California Air Resources Board/ emission controlle..
JE Ford SOHC 2.8L flat-top 5.5" rod pistonsCompression Height: .960"Wristpin diameter: .927"Use with 1.2, 1.5, 3mm rings (available separately here)Va..
Description:Esslinger spec'd JE Pistons - forged from 2618 AlloyPistons are proven to handle over 500 whp!Bore sizes available: +.001", +.020", and +...
These 31mm solid cam followers will work with our Ecboost and Duratec camshaft sets, and are available in the following range of thickness': 3.000 - 3..
If you are replacing it's always good practice to replace the lash adjusters, and rockers. On reduced base circle cams lash adjusters with a wide oil ..